Gilson 1200MP manual 8 – ADJUSTMENT, Drum Shaft Bearing Hangers, Engine/Motor, Jack Shaft Bearings

DRUM SHAFT BEARING HANGERS

Drum yoke bearing hangers are located on each side of the drum, and are equipped with grease fittings. These bearings should be lubricated once each week with lithium based grade 2 multi-purpose grease.

ENGINE/MOTOR

Refer to the engine/motor operating instructions for all maintenance and lubrication instructions and requirements.

JACK SHAFT BEARINGS

Pillow block style bearing are used on the drive train counter-shaft. See Drum Seal Housing, Lubrication Guidelines for more information. See Figure 4 for bearing locations.

8 – ADJUSTMENT

RUBBER WIPER BLADES

Adjust rubber wipers so they fit snugly against the drum but not to the point that they fold over when the blades rotate.

12