Gilson 1200MP manual Mixer Transport, Operating the Mixer, Extension Cords for Electric Motors

4 – MIXER TRANSPORT

1.Secure drum by engaging drum lock.

2.Secure all moveable parts, including the rear housing.

3.Secure tow pole coupler to vehicle and attach safety chains and hooks. (See FIGURE 2, Safety Chains).

A.Pintle type couplers require the appropriate tow vehicle coupler retainer.

B.Match ball coupler size exactly with hitch ball.

5 – OPERATING THE MIXER

STARTING THE MIXER

Start the mixer engine/motor. Refer to the engine/motor manual for proper starting procedures.

When the engine/motor is warmed up and is running smoothly, move the control lever to the engaged position.

EXTENSION CORDS FOR ELECTRIC MOTORS

The following size extension cords should be used: length of cord, up to 100 ft.-14 gauge wire; up to 200 feet-12 gauge wire; up to 300 feet-10 gauge wire; up to 400 feet-8 gauge wire.

NOTE: Extension cord must be a 3-wire power cord and 3-wire power plug that is approved for outdoor use. When connecting the power cord, always connect cord to motor first and then plug into a grounded receptacle. When disconnecting the power cord, always unplug the grounded receptacle first.

7