Installation Instructions
General information |
|
| ||
! | install this appliance in a | |||
Installation should only be carried out by a qualified | ||||
installer or engineer. |
| We recommend that you | ||
| work top which is a mini- | |||
Please keep to the following points most carefully; |
| The hob can be fitted into | ||
• | The hob should not be fitted above a washing |
| mum 38mm deep. | |
| a work top less than | |||
| machine, a fridge or a freezer. |
| 9mm gap between hob | |
• | Wall surfaces above the work surface and in the |
| 38mm deep, but the | |
| base and appliance must | |||
| immediate vicinity of the cooking hob must be heat |
| be maintained. | |
• | resistant. |
|
| |
|
| |||
Laminated surfaces and the adhesive used for fixing |
|
| ||
| them must be heat resistant in order to avoid any |
|
| |
• | damage. |
|
| |
The space for air circulation, located underneath and |
|
| ||
| at the back of the hob improves its reliability by |
|
| |
• | ensuring that it will cool down, efficiently. |
|
| |
For installations in the Republic of Ireland, refer to |
|
| ||
| National Regulations applicable to this product. |
|
| |
Choosing your installation |
|
| ||
1. | Over a unit with a door or drawer. |
|
| |
2. | Above an oven. |
|
| |
Induction hob
Make sure that the air inlets through the ventilator grids underneath the hob are never blocked.
Installing the hob over a unit with a drawer or door
Air outlet is underneath work surface.
If necessary, remove the front crosspiece of the unit. Suitable protection to prevent obstruction of the air inlet to the fans must be provided.
20
