16.Make sure all clamps and locks are firmly tightened before drilling.
17.Securely lock the head and table support to the column, and the table to the table support before operating your drill press.
18.Never turn your drill press on before clearing the table of all objects (tools, scraps of wood etc.)
19.Before starting the operation, jog the motor switch to make sure the drill bit does not wobble or vibrate.
20.Let the spindle reach full speed before starting to drill. If your drill press makes an unfamiliar noise or if it vibrated excessively, stop immediately, turn the drill press off and unplug it. Do not restart until the problem is corrected.
21.Do not perform layout assembly or setup work on the table while the drill press is in operation.
22.Do not exceed the rpm stated on the bit or accessory. See the instructions that come with the accessory.
23.When drilling large diameter holes, clamp the workpiece firmly to the table. Otherwise, the bit may grab and spin the workpiece at high speed. Do not use fly cutters or
24.Make sure the spindle has come to a complete stop before touching the workpiece.
25.To avoid injury from accidental starting, always turn the switch off and unplug the drill press before installing or removing any accessory attachment or making any adjustment.
CAUTION! Do not expose to rain or use in damp locations.
WARNING! For your own safety read instruction manual before operating drill press. Wear eye protection, do not wear gloves, necktie or loose clothing, clamp workpiece or brace against column to prevent rotation, use recommended speed for drill accessory and workpiece material.
6
