Global Machinery Company DTC32L instruction manual

Models: DTC32L

1 21
Download 21 pages 44.61 Kb
Page 13
Image 13

CAUTION. Over stretching the rubber straps may result in fracturing the straps.

6.Reconnect the tank 1 inlet hose (25) onto the combination valve (8), by depressing and sliding back the sleeve of the quick coupler valve while reconnecting the hose.

7.Open the tank 1 isolation valve (18).

Note. When the isolation valve is opened and there is is compressed air in the lower tank you will hear the air equalise into the top tank.

The portable air tank has been properly installed and connected to the air compressor unit. Your air compressor is now ready for use.

WARNINGS.

1.Never attempt to remove any electrical component whilst the compressor is connected to the power supply. Switch off the power and remove the electrical plug.

2.Do not adjust the safety valve.

3.Do not use an electrical extension cable.

4.Ensure that the lubricating oil is clean and that the oil level is maintained at the mid point of the red circle in the oil sight glass (16).

5.Take care when discharging air from the tank, i.e. from the safety valves (7), the drain cocks (9) or the air outlets (4 and 27). Compressed air can be extremely dangerous. Take care the discharge air does not cause dust, stones or any other foreign particles to be blown through the air and that the air is discharged in a safe manner.

13

Page 13
Image 13
Global Machinery Company DTC32L instruction manual