Global Machinery Company DTC32L instruction manual For the first time

Warning labels explained

On the tank of your air compressor you will notice various warnings about the operation of the compressor. These warnings and the procedures associated with them are explained fully in this manual on the following pages.

Please take note of these. They are important for your safety and that of others in the vicinity.

���������

Check the oil level before starting the

compressor every time.

Make sure the compressor is on a level surface prior to checking the oil level.

The oil level is required to be at the red dot on the oil level sight glass prior to use.

Use only oil grade specified in the

instruction manual.

����������

To prevent build-up of condensation, open drain cock daily

����������������

When filter becomes dirty or oily, clean or replace filter. Refer to instruction manual.

��������	���������	Tank capacity:
	Read instruction manual
		DTC32L Air Compressor
Do not switch on	prior to starting unit.	32 litres
	This equipment	Pump displacement:
for the first time		206 l/m
	operates from
without first	AC mains only.	Free air delivery:
		114 l/m
filling with oil.		Max. working pressure:
		0.8 MPa

��������

Unit starts

automatically.

Switch off power supply,

remove plug & relieve air pressure prior to commencing service tasks.

�������	��������	��������
High voltage used on	Air discharged from	Test the safety relief
this equipment. Prior to
	this unit is not	valves daily.
servicing or removing the
	suitable for human
cover, switch off the		Refer the instruction
	consumption.
power supply & remove		manual.
plug from mains. Ensure
mains outlet is adequately
rated for this unit.

3