![](/images/new-backgrounds/1258784/25878427x1.webp)
Troubleshooting
Trouble | Possible cause | Possible remedy |
|
|
|
Motor will not run, running too | Power fault or supply voltage too low | Check the power supply |
slow or becoming excessively hot | Power cord too long or too thin | Use authorised service centre |
| ||
|
| to replace the power cord |
|
|
|
| Faulty pressure switch | Use authorised service centre |
|
| to repair or replace the switch |
|
|
|
| Faulty motor | Use authorised service centre |
|
| to repair or replace the motor |
|
|
|
| Main compressor sticking/tight | Use authorised service centre |
|
| to repair or replace faulty parts |
|
|
|
Main compressor sticking/tight | Moving parts damaged by heat | Use authorised service centre to |
| due to insufficient lubrication | check crankshaft, bearings, con rod, |
|
| piston rings, etc and replace |
| Moving parts damaged or blocked | |
| where necessary | |
| by foreign particle | |
|
| |
|
|
|
Vibration or abnormal noise | Loose part | Use authorised service centre |
|
| to check and repair if necessary |
|
|
|
| Foreign body in main compressor | Use authorised service centre |
|
| to check and clean if necessary |
|
|
|
| Piston connecting with the valve seat | Use authorised service centre |
|
| to increase size of gasket |
|
|
|
| Moving parts excessively worn | Use authorised service centre |
|
| to repair or replace |
|
|
|
14