Storage

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

Spark plugs

1.Remove spark plug (15) from the generator with the spark plug spanner socket supplied.

2.Remove carbon deposits using a wire brush.

3.Check for discoloration on the top of the spark plug. The standard colour should be a tan colour.

4.Check the spark plug gap. The acceptable gap should be between 0.7–0.8mm (Fig. K).

K

0.7– 0.8mm (0.028”– 0.031”)

5.The recommended spark plugs are as follows:

BPR6ES (NGK) RN9Y (Champion) W20EPR-U (Denso) WR6DC (Bosch)

Engine oil replacement

1.Place the generator on a level surface and warm up the engine for several minutes. The stop the engine.

2.Remove oil filler cap (7).

3.Place an oil pan under the generator and commence removing the oil drain cock (11) so that the oil can be completely drained.

4.Check the oil drain cock (11), gasket, oil filler cap (7) and O-ring. If damaged, have these replaced.

5.Reinstall the oil drain cock (11).

6.Add engine oil to the upper level. Recommended 4 stroke engine oil is SAE #30.

CAUTION. Check that no foreign material, debris, dust enters the crankcase.

Air filter

It is very important to maintain an air filter in proper condition. Damage to the generator may arise if the filter has:

•Improperly been serviced.

•Dirt and other foreign elements adhering to the filter due to improper installation and engine wear.

ALWAYS keep the filter clean at all times.

1.

Remove the air filter cover

L

 

(13) on the side of the

 

 

 

generator by lifting the 2

 

 

clips on both the top and

 

 

bottom of the air filter cover

 

 

(13) (Fig. L).

 

2.

Remove the air filter

 

 

(Fig. M).

 

3.

Wash the air filter in solvent

 

 

 

 

 

 

or kerosene and allow to dry.

M

4.Lubricate the filter using motor oil (SAE #30).

5.Thoroughly squeeze the filter removing excess oil.

6.Replace air filter back into the engine.

7.Secure the cover back onto the side panel of the generator.

IMPORTANT. Never run the engine without the air filter element in place.

18

Page 17 Page 19
Page 18
Image 18
Global Machinery Company GEN2300ES instruction manual Storage, Spark plugs, Engine oil replacement, Air filter
Page 17 Page 19

GEN2300ES specifications

The Global Machinery Company GEN2300ES is an innovative power generator designed to meet the needs of both residential and commercial users. This portable inverter generator is known for its reliability, efficiency, and versatile features, making it a popular choice among users seeking a dependable power source for various applications.

One of the standout features of the GEN2300ES is its impressive fuel efficiency, allowing it to operate for extended periods on a single tank. With a 2.3-gallon fuel capacity, it can deliver up to 10 hours of continuous power at a 25% load. This efficiency not only saves users money on fuel costs but also enhances its suitability for outdoor adventures, job sites, and emergency backup situations.

The GEN2300ES is powered by a robust engine that produces a clean and stable output. Thanks to its inverter technology, the generator is capable of producing pure sine wave power, making it safe for sensitive electronics, including laptops, smartphones, and medical devices. This makes it an ideal choice for users who require reliable power without any risk of damage to their equipment.

Another significant characteristic of the GEN2300ES is its lightweight and compact design. Weighing approximately 49 pounds, it features an ergonomic handle that makes it easy to transport. This portability is a crucial factor for campers, tailgaters, and users needing power on the go.

Furthermore, the GEN2300ES incorporates several user-friendly technologies. Its advanced digital display provides real-time updates on wattage usage, remaining run time, and maintenance alerts, ensuring that users can keep track of their generator’s performance. Additionally, it is equipped with a quiet operation system, producing only 52 dBA at a quarter load, allowing for peaceful surroundings during use.

Safety features are also paramount in the GEN2300ES design. It includes overload protection and low oil shut-off mechanisms to prevent engine damage. The generator is also compliant with EPA and CARB regulations, reflecting its commitment to environmental standards and user safety.

In conclusion, the Global Machinery Company GEN2300ES is a cutting-edge portable inverter generator that combines efficiency, portability, and advanced technology. With its rigorous safety features and ability to deliver clean power, it stands out as a reliable choice for users seeking to maintain power in diverse scenarios.
Top Page Image Contents