Global Machinery Company VEC158-AU LED Indicators, Area Lights, Using the Spotlight

LED Indicators

The spotlight has 3 Red and 1 Green LED Indicators (12) which indicates battery level when in operation and status whilst charging.

Red LED’s indicates battery status as either Low (one red LED), Med (Two A LED) or High (three LED) level of

charge (fig A).

Green LED indicates battery is fully charged.

To turn the LED Indicators on and off, depress the LED status button (11).

Area Lights

There are also two area lights (3), which illuminates the work area improving vision.

To turn this light on slide the 3-position switch (10) to the “area” setting, to turn it off return switch to the “single” setting position.

Using the Spotlight

To prevent accidental operation of the spot light, a plastic cover shrouds the trigger switch. To operate, lift the cover upwards to access the trigger switch.

The trigger switch is squeezed to turn the spotlight on (fig. B). Release the trigger switch to turn B off the spotlight (fig. C).

Selection of single bulb or dual spotlight or area light is controlled by a three-position slide switch on the rear of the unit (10) (fig. D).

Left switch position turns on area lights.

Centre switch position selects the	C
single spotlight bulb.

Right switch position selects both spotlight bulbs.

Using the 12 volt accessory outlet

The VEC 158-AU also has the facility to operate other 12 Volt products, provided they are fitted with mating 12 Volt DC adaptor.

The MAX current rating the Spotlight will provide for such accessories is 5 Amp. Do not use this accessory socket for any accessory which exceeds 5 amp.

To power an accessory, flip up the small rubber cap (7) and fully insert the DC adaptor of the accessory (fig. E). There is no On / Off switch for the DC outlet so ensure the accessory is in

the OFF position when the DC D plug is inserted.

Ensure to replace the rubber cap when the DC plug is removed to protect the socket from the entry of foreign matter.

E

10