Globalsat Technology ND-100 specifications UNINSTALLING THE USB DRIVER Windows, FAQ’s

NOTE: Configuration (or selection) of an assigned COM port for the GPS device from within your mapping or charting software must be completed whenever using the software for the first time.

6. UNINSTALLING THE USB DRIVER (Windows)

To uninstall the ND-100 driver, click the Windows START button >>PROGRAMS>>PL-2303 USB- Serial Driver and select UNINSTALLER from the menu.

7. FAQ’s

I am not getting GPS data into my application.

1.Check your DEVICE MANAGER to confirm the COM Port number assigned to the GPS Receiver (it will be listed under the PORTS (COM & LPT) heading as Prolific Serial-to-USB Comm. Then be sure this is the same COM port number configured in your application.

2.Be sure your Baud rate is configured correctly at: Baud Rate: 38400

Data bit: 8

Parity: None

Stop Bit: 1

Flow Control: None

3.Re-boot your computer and then insert the USB GPS into a USB port.

4.Configure the MiniCDU utility with the correct COM Port and test your GPS receiver first before using it in your application.

Will the ND-100 work with Street Map, Marine Chart or Aviation software?