INSTALLATION AND PROPER GROUNDING
UNPACKING:
1.Unpack the slicer immediately after receipt. If the machine is found to be damaged, save the packaging material and contact the carrier within fifteen (15) days of delivery. Immediately contact your source of the equipment. You have no recourse to damage after fifteen (15) days.
2.You should receive with the slicer, rubber feet, lubricating oil, warranty card, and an owners operator instruction manual. Contact Globe or your local supplier if you did not receive all of these materials.
TO AVOID SERIOUS PERSONAL INJURY PROPERLY
INSTALL SLICER IN ADEQUATE WORK AREA
•ALWAYS install equipment in work area with adequate light and space.
•ONLY operate on a solid, level, nonskid surface.
•NEVER bypass, alter, or modify this equipment in any way from its original condition. Doing so may create hazards and will void warranty.
•NEVER operate slicer without knife cover and knife ring guard securely installed.
•NEVER operate without all warnings attached.
INSTALLATION:
1.Read this manual thoroughly before installation and operation. DO NOT proceed with installation and operation if you have any questions or do not understand anything in the manual. Contact your local representative or Globe first.
2.Remove the slicer from the corrugated box.
3.Make sure rubber feet are firmly tightened to the slicer base.
NEVER USE SLICER WITHOUT RUBBER FEET INSTALLED.
4.Select location for slicer that has a level, solid, nonskid surface and a
USE AT LEAST TWO PEOPLE TO LIFT SLICER UP TO OPERATING LOCATION. NEVER ATTEMPT TO LIFT SLICER ALONE.
Page 7
