Select MENU
HANDSET 1
REDIAL MENU MEM
Select SET TIME
HANDSET SETTINGS
SET TIME
CLOCK MODE
REGISTER
^ OK ^
Enter time, press AM/PM, then SAVE
SET TIME 12:00 AM
< SAVE AM/PM
To turn clock on or off
CLOCK ENABLE
ON
OFF OK ON
Telephone Operation
Handset clock settings
To set time
Follow steps at left to set the handset clock time. Use the keypad to enter four digits (i.e., 09:15), then press AM/PM to toggle the display between AM and PM.
When the correct time is displayed, press SAVE.
NOTE: You can choose to set the time manually, or you can allow it to be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 5).
To set the answering system clock, see page 25.
To turn clock on or off
The handset time display is optional. To turn it on or off, select MENU, press Vuntil CLOCK MODE is highlighted, then press OK.
Press ON or OFF buttons to enable or disable the clock display, then press OK.
PAT JOHNSON
^ EDIT ^
Handset: 50 entries
Base: 50 entries
Phonebooks
Handset and base phonebooks
There are separate phonebook directories in the hand- set and the base.
Each phonebook can store up to 50 entries. Each entry can contain a number up to 32 digits, and a name up to 15 letters long. A convenient search feature can help you find and dial numbers quickly (see page 19).
The procedure for entering, editing and dialing phone- book entries is the same for both the handset and the base.
Timeouts and error tones
If you pause for too long while making an entry the pro- cedure will time out and you will have to begin again.
If all memory locations are in use, an error tone will sound when you attempt to enter a new number. This means the memory is full, and you will not be able to store a new number until you delete an existing one.
16 | 17 |
