GN Netcom GN 4150 English - User guide for GN, About the GN, Assembling and installing, Amplifier

Models: GN 4150

1 42
Download 42 pages 38.35 Kb
Page 3
Image 3
English - User guide for GN 4150

English - User guide for GN 4150

Thank you for choosing the GN 4150 by GN Netcom.

This user guide will give you information and instructions on assembling, using and maintaining your GN 4150, and contains the following sections:

About the GN 4150

The GN 4150 is a corded headset solution, made up of a headset and an amplifier. The GN 4150 gives you hands-free convenience and enhanced sound quality for your telephone conversations.

About the GN 4150

Assembling and installing

Features and customisation

Optional features

Answering and making telephone calls

Frequently asked questions

Safety and operational information

1.Amplifier

1a) Mute switch

1b) Computer/telephone switch

1c) Volume button

1d) Headset/Handset switch

1e) Online indicator

1f) Termination switch

1g) Tone adjustment switch

1h) Transmit volume adjustment

1i) Handset socket

1j) Telephone socket

1k) Computer socket

1l) Power socket

1m) Headset socket

2.Headset stand

3.Headset

4.Headband

5.Earhook

6.Leatherette ear cushion

7.Foam ear cushion

8.Connector cord

9.Computer Y-cord

Assembling and installing

Assembling and integrating the amplifier to the telephone:

1.Open the battery compartment and insert the two in- cluded batteries into the amplifier.

2.Attach the headset stand to the amplifier.

3.Disconnect the telephone’s handset cord from the tele- phone and connect it to the amplifier socket marked 0.

4.Plug one end of the connection cord into the socket on the amplifier marked 1.

5.Plug the other end of the connection cord into the tele- phone’s headset socket, usually marked with 3.

Note: If your telephone does not have a headset socket, then plug the connection cord to the telephone’s handset socket instead.

Assembling and connecting the headset to the amplifier:

1.Gently snap on the headset receiver to the headband.

2.Insert the headset’s cord to the plug on the bottom of the amplifier.

3.Place the headset into the headset stand.

2

3

Page 3
Image 3
GN Netcom GN 4150 manual English - User guide for GN, About the GN, Assembling and installing, Amplifier