Golden Technologies GP601 CC owner manual Reset Button, SWING-AWAY Desk ARM

Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 02/20/08

OPERATION

Reset Button

(circuit breaker)

Figure 20

Reset Button

If the main circuit breaker trips, please wait for approximately 1 minute and then push the reset button to reset the main circuit breaker. See figure 20.

NOTE: Usually, the thermal rollback feature is more sensitive than the main circuit breaker. We recommend that you turn off the power to the chair and wait for five minutes when the chair suddenly loses speed or power. Doing so will allow the overheated electrical components to cool to their normal operating temperatures.

SWING-AWAY DESK ARM

Your Compass™ is equipped with a swing-away desk arm that provides you with the con- venience of positioning your chair close to a work surface such as a table or desk.

To swing the desk arm simply push on the side of the joystick until the joystick swings to the retracted position. See figures 21, 22, and 23.

Figure 21 Figure 22 Figure 23

28