Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC | Revised 02/20/08 |
DISASSEMBLY
: Make certain that the controller power is turned off and that the chair is NOT in freewheel mode before attempting to perform disassembly.
SEAT REMOVAL
1.Disconnect the joystick cable from the controller cable.
2.See page 12 to complete the removal.
BATTERY REMOVAL For Transportation
After removing the seat and battery box cover:
1.Disconnect the battery connectors and unfasten battery straps. See figures 7 and 9 on page 14.
2.Use the battery handles to lift the batteries out, one at a time.
Note: The batteries weigh 25 to 39 pounds each (depending on type). Please get help if you do not feel capable of safely lifting that much weight.
For Replacement
After removing the seat and battery box cover:
1.See pages 10 and 11.
2.Disconnect the battery connectors and unfasten battery straps.
3.Use the battery handles to lift the batteries out, one at a time.
4.Remove the protective caps from the battery terminals.
5.Disconnect the positive (+) battery cables from the battery terminals, one at a time.
6.Disconnect the negative
7.Install new batteries. See BATTERY INSTALLATION on page 14 or see the instructions on the inside of battery box lid and follow the steps.
31
