Golden Liteway | Revised 11/06 |
Transporting Your Scooter
To transport your scooter you may need to dismantle it. Follow these step by step instructions
Do not trap cable when folding
Do not trap cable when folding
Step 1: Preparation
1.Turn off the ignition and remove key.
2.Fold down the backrest and lift off the seat.
3.Pull the seat upwards and it will release.
4.When assembling the seat make sure the seat is located correctly then turn until it locks.
Step 2: Tiller
1.Fold the tiller as shown on page 19. You can remove the under seat basket or leave it in position.
2.The under seat basket is retained with mag- nets. To remove grab the basket handle and pull out.
3.To replace, locate into the same position and push in until you feel the magnets locate.
20
