Golden Technologies LitewayTM owner manual Assembly of the Transaxle or Rear Wheel Assembly

Golden Liteway GL-100 Owner’s Manual Revised 11/06

Assembly of the Transaxle or Rear Wheel Assembly

Fork

Pins

When assembling the vehicle after transporting first assemble the transaxle or rear wheel as- sembly. Place the assembly as shown next to the frame. The fork has to locate into the pins as shown.

The pins are marked in red.

SAFETY NOTICE

Lift the frame over the forks. Line up the pins and lower the frame. When both sets are locat- ed push the frame down. You will hear a “click” as the assembly locks. If the transaxle is not located correctly the vehicle will not operate.

Assemble the remaining sections in reverse order of dismantling.

24