BENDIX BW2849 manual Code 15 SID 10, FMI 2 Right Side Sensor, Right Side Sensor?

Fault Isolation Procedures

Code 15 (SID 10, FMI 2) Right Side Sensor

Step A	Procedure	Condition	Action
1.	Key off.
2.	Is vehicle equipped with a	If the vehicle has a Right Side	Go to Step B.
	Right Side Sensor?	Sensor
		If the vehicle does not have a	The Central Processing Unit
		Right Side Sensor	has been programmed for a
			Right Side Sensor. With a
			PC-based or Hand-held
			Diagnostic Tool, place the

Right Side Sensor option in “NO” position. Go to Step V.

Step B Procedure Condition Action

1.Key off.

2.Disconnect 3-way stub connector at the Right Side Sensor.

3.Key on.

4.Measure voltage between:

•Pins A and B.

•Pins A and C.

If voltage between pins A and B is 1.8 to 2.5 volts and

If voltage between pins A	Replace Right Side Sensor.
and C is 7.0 to 7.5 volts	Go to Step V.

(SID 10, FMI	Code 15
2)

If voltage is outside of range Go to Step C.

B A

C

	VOLT
V	COM	A

B A

C

	VOLT
V	COM	A

2-38