BENDIX BW2849 manual Appropriate isolation Properly Go to Step a Procedure

Symptom Isolation Procedures

Antenna Not Detecting Targets

Step A	Procedure	Condition	Action
	1. Align the Antenna using	Antenna is aligned properly	Go to Step V.
	the Antenna Assembly
	Alignment Procedure in
	the Bendix™ VORAD® system
	Service Manual (BW2863).
	Note: If fail light is on go to	Antenna can not be aligned	Replace Antenna.
	the appropriate isolation	properly	Go to Step A.
	procedure.

Step V	Procedure	Condition	Action
1.	Key on.	If complaint has been	Test complete.
2.	Drive vehicle to	repaired
	determine whether the
	complaint has been
	repaired.
			Return to Step A to find error in
		If complaint has not been	testing.
		repaired

Antenna Target Detection Test

3-2