BENDIX BW2849 manual Driving Techniques

Fault Isolation Procedures

Driving Techniques

Fault	Hand-Held Codes
Codes	SID	FMI	Description	Type of Code	Driving Technique
11, 12	254	4,12	Central Processing Unit	Component	Key on. If the fault is present,	the
					system should automatically detect the
					problem and set the code. If the fault
					is not present at key on, operate	the
					vehicle and attempt to duplicate	the
					driving conditions that triggered the
					fault code. Possible triggers include		Service
					heat and vibration.
13, 34	9	2,4,5,12	Driver Display Unit	Component	Key on. If the fault is present,	the
			(Not applicable for		system should automatically detect the		Procedure
			Freightliner IDI.)		problem and set the code. If the fault
					is not present at key on, operate	the
					vehicle and attempt to duplicate	the
					driving conditions that triggered the
					fault code. Possible triggers include
					heat and vibration.
14, 35	1,2	2,12,14	Antenna	Component	Key on. If the fault is present,	the
					system should automatically detect the
					problem and set the code. If the fault
					is not present at key on, operate	the
					vehicle and attempt to duplicate	the
					driving conditions that triggered the
					fault code. Possible triggers include
					heat and vibration.
15	10	2	Right Side Sensor	Component	Key on. If the fault is present,	the
					system should automatically detect the
					problem and set the code. If the fault
					is not present at key on, operate	the
					vehicle and attempt to duplicate	the
					driving conditions that triggered the
					fault code. Possible triggers include
					heat and vibration.
16	11	2	Left Side Sensor	Component	Key on. If the fault is present,	the
					system should automatically detect the
					problem and set the code. If the fault
					is not present at key on, operate the
					vehicle and attempt to duplicate the
					driving conditions that triggered the
					fault code. Possible triggers include
					heat and vibration.

1-4