Fault Isolation Procedures

Power-Up Sequence Test

Overview

A failure during the power-up self-check indicates a failure of the Central Processing Unit.

Detection

The power-up self-check is performed automatically each time the key is turned on. Turn the key on and watch the Driver Display Unit. If lights on the Driver Display Unit remain on after 15 seconds, or never come on, the self-check has failed. NOTE: Not applicable for Freightliner IDI (Integrated Dash Interface).

Required Tools

Digital Volt/Ohm Meter

Possible Causes

Central Processing Unit

Driver Display Unit

Vehicle Harness

Fallback

If self-check fails, the product can not perform any operations.

Harness

 

Central

 

Driver

Processing Unit

 

 

 

Display Unit

 

2-5

 

 

Page 16
Image 16
BENDIX BW2849 manual Power-Up Sequence Test, Central Processing Unit Driver Display Unit Vehicle Harness