BENDIX BW2849 manual Step a, Electrical Pretest

Fault Isolation Procedures

Electrical Pretest

Step A Procedure Condition Action

1.Key off.

2.Inspect starter/battery connections for integrity.

3. Measure voltage across	If voltage is 11 to 13 volts
battery.	on a 12 volt system or 22 to
	26 on a 24 volt system
	If voltage is outside of
	range

Go to Step B.

Repair or replace batteries and charging system as required. Repeat this step.

	VOLT
V	COM	A

Electrical Pretest

2-2