BENDIX BW2849 manual Side Sensor Detection Test

Fault Isolation Procedures

Side Sensor Not Detecting Targets

Step A	Procedure	Condition	Action
1.	Key on.
2.	Using a PC-based or	If properly configured	Go to Step B.
	Hand-held Diagnostic
	Tool, confirm the
	vehicle is configured for
	a Left, Right, or Both
	Side Sensor(s).
		If not properly configured	Using a PC-based or Hand-held
			Diagnostic Tool, place the Side

Sensor option(s) in the “yes” position. Go to Step V.

Step B		Procedure	Condition	Action
1.		Key on.
	2. Place a moving target 2		If the Side Sensor Display	Test complete.
		to 10 feet (0.61-3 m)	indicates that a target is
		from but directly in	detected
		front of the Side
		Sensor.
			If the Side Sensor Display	Go to Step C.
			does not indicate a target
			is present

Side Sensor Detection Test

3-4