5 | A MPLIFI ER CO NTROLS |
| Manual Operation |
| On the front plate of the GOLDMUND TELOS 200 amplifier you will find only one POWER |
| key. |
| When first connected to mains power the green Led will flash (equal time on and off) for |
| around fifteen seconds whilst the amplifier goes through the POWER UP sequence. |
| At the end of this sequence, the amplifier enters STANDBY mode. The green Led flashes |
| slowly (four sequences off then one on). |
| Once in STANDBY mode, a short key press (<1 second) switches the amplifier ON. The green |
| Led is permanently illuminated in this mode. If the digital input is used, the yellow Led may |
| flicker, showing there is no lock and the amp remains muted until a lock is found. With an |
| analog input, the amp is immediately operational and the orange Led illuminated |
| The amp may be returned to STANDBY mode with a short key press. A long key press (>2 |
| seconds) takes the amplifier inPOWER OFF mode. |
| If an error is detected the red Led will be illuminated. Once the cause of the error has been |
| removed, the amplifier can be returned to STANDBY mode with a long key press. |
| These security features are provided to reduce the risk of accidental POWER ON or POWER |
| OFF and to protect the amplifier in ERROR mode. |
| Key Press Sequence Summary |
Start mode | Power Key Press | End mode | Green Led mode | |
ERROR | SHORT | - | - | |
LONG | STANDBY | SLOW FLASH | ||
| ||||
STANDBY | SHORT | ON | ON | |
LONG | OFF | OFF | ||
| ||||
ON | SHORT | STANDBY | SLOW FLASH | |
LONG | OFF | OFF | ||
| ||||
OFF | SHORT | - | - | |
LONG | STANDBY | SLOW FLASH | ||
|
User manual - GOLDMUND TELOS 200 UNIVERSAL POWER AMPLIFIER P 8