Goldmund TELOS 200 user manual A Mplifi Er Co Ntrols

5 A MPLIFI ER CO NTROLS

There is no power ON/OFF switch at the connector. As soon as the amplifier is connected to AC line and if the amplifier has not detected an error previously, the yamplifier is receiving current. but can be in one of four modes; STANDBY, ON, OFF or ERROR. (see Manual Operation section).

The TELOS 200 may be powered on either manually (Manual Operation) or automatically when receiving a signal (Auto-Power Operation). This is selected internally by the small white 10-position circular selector located on the top circuit of the amplifier, close to the big capacitors.

There is one position for Manual operation and 9 for Auto-Power operation. Positions 1 through 8 enable various delays to be set. This supports powering-up a quantity of amplifiers without a big surge on the AC line.

Position 0: Manual Operation

Position 1: Power after 200ms

Position 2: Power after 400ms

Position 3: Power after 600ms

Position 4: Power after 800ms

Position 5: Power after 1s

Position 6: Power after 1.2s

Position 7: Power after 1.4s

Position 8: Power after 1.6s

Position 9: Power after 1.8s

User manual - GOLDMUND TELOS 200 UNIVERSAL POWER AMPLIFIER P 7