12.Hold the Dip Arm (11) behind the Backrest Frame
(8) as shown. Attach the Dip Arm to the Backrest Frame with two M10 x 100mm Bolts (43) and two M10 Nylon Locknuts (44). Do not overtighten the Locknuts; the Dip Arm must be able to pivot easily.
13.Attach the Right Pad Base (26) and an Arm Pad (25) to the Dip Arm (11) with two M6 x 70mm Screws (35) and two M6 Washers (36).
Repeat this step on the other side of the Dip Arm (11).
14.Attach a Dip Handle (12) to the Dip Arm (11) with an M10 x 50mm Screw (27) and a Dip Cap (48).
Repeat this step on the other side of the Dip Arm (11).
12 |
|
11 |
|
43 |
|
8 | 44 |
| 43 |
13 |
|
| 25 |
| 11 |
26 |
|
| 36 |
36 |
|
35 |
|
14 |
|
| 11 |
48 |
|
27 |
|
| 12 |
10
