ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the exercise rack can be assembled suc- cessfully by anyone. However, it is important to realize that the versatile exercise rack has many parts and that the assembly process will take time. Most people find that by setting aside plen- ty of time, assembly will go smoothly.
To hire an authorized service technician to assemble the weight bench, call
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the exercise rack, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
The following tools (not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a socket set, a set of
1.
Before beginning assembly, make sure that you have read and understand the informa- tion in the box above. Refer to the PART IDENTIFICATION CHART for help identifying small parts.
Attach two Base Pads (17) to the Base (1) with two M4 x 20mm Screws (42).
Press a Base Cap (16) onto a Base Handle (2).
Repeat with the other Base Handle.
Insert the two Base Handles (2) into the Base (1) as shown. Insert four M10 x 90mm Bolts (46) and two M10 x 87mm Bolts (47) up through the Base.
It may be helpful to place tape over the bolt heads to hold them in place.
1 |
|
| 47 |
1 |
|
46 |
|
17 |
|
42 | 17 |
| |
2 |
|
| 42 |
| 46 |
2 |
|
16 |
|
5
