Gold's Gym GGBE1774.0 manual Repeat this step on the other side of the Top Frame

6.Attach the Support Frame (15) to the Upright Base (3) with an M10 x 62mm Bolt (24) and an M10 Nylon Locknut (44). Do not tighten the

Locknuts yet.

Attach the Support Frame (15) and the Left and Right Legs (6, 7) to the Backrest Frame (8) with four M10 x 53mm Bolts (30) and four M10 Nylon Locknuts (44).

Tighten the M10 Nylon Locknuts (44) and M8 x 15mm Screws (49) used in steps 2–6.

7.Attach a Pull-up Handle (13) inside the Top Frame (5) with four M8 x 19mm Screws (38) and four M8 Curved Washers (39).

Slide a 51mm Round Outer Cap (23) onto the Pull-up Handle (13) and press the Cap into the Top Frame (5).

Repeat this step on the other side of the Top Frame (5).

8.Attach the Pad Frame (10) to the Pivot Arm (9) with two M8 x 19mm Screws (38), two M8 Washers (37), and two 5mm Spacers (34).

6
	8
30	44
44			24
	15
44			30
7	6		3
7
		39	38
	38		5
23			38
13	38		39
8
	38		9
		34
	37
			37
			34
	10		38

8