13.Attach the Short Pin (37) to the Curl Bar Frame (15) with an M4 x 16mm Screw (58).
Attach the Curl Bar Bumper (53) to the Curl Bar Frame (15) with an M4 x 16mm Screw (58).
Attach the Curl Bar Tube (26), with the small holes toward the bottom, to the Curl Bar Frame
(15)with an M10 x 70mm Button Screw (60), an
M10 Split Washer (55), an M10 Washer (64), and a 50mm Spacer (65).
13
|
| 55 | |
37 |
| 65 | |
26 | |||
| |||
|
| 60 | |
|
| 64 | |
| 53 | Small | |
58 |
| Hole | |
| 58 |
| |
| 15 |
| |
14.Make sure all parts are properly tightened before you use the weight bench. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 12.
11
