Gold's Gym GGTL03607.3 manual Assembly, adjustable wrench

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver		and
adjustable wrench	.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

1/4" Star Washer	M8 Star	M10 Star	Base Pad Spacer	M10 Nut (33)–2
(71)–2	Washer (10)–6	Washer (8)–4
			(64)–2
Bolt Spacer (79)–4		M4.2 x 13mm	M4.2 x 19mm	M4.2 x 25mm Tek
		Silver Screw (4)–1	Screw (1)–4	Screw (2)–4
#10 x 1" Tek	1/4" x 1/2"	M8 x 19mm	M10 x 50mm Bolt (27)–2
Screw (76)–2	Bolt (9)–2	Bolt (6)–6
		M10 x 96mm Bolt (5)–4

6