Gold's Gym GGTL03607.3 manual Make sure that the power cord is unplugged, freely

1.	Make sure that the power cord is unplugged.	1
	With the help of a second person, carefully tip
	the treadmill onto its left side. Partially fold the			77	Hole
	Frame (48) so that the treadmill is more stable;
	do not fully fold the Frame yet.				81
	Cut the tie securing the Upright Wire (77) to the	48					2
	Base (85). Next, locate the tie in the indicated
	hole in the Base, and use the tie to pull the				85
	Upright Wire out of the hole.
	Attach a Base Pad (81) to the Base (85) in the
	location shown with an M4.2 x 25mm Tek Screw
	(2) and a Base Pad Spacer (64). Then, attach	64	81
	another Base Pad (81) with only an M4.2 x			2
	25mm Tek Screw (2).
2. Attach a Wheel (86) to the Base (85) with an		2
	M10 x 50mm Bolt (27) and an M10 Nut (33). Do				77
	not overtighten the Nut; the Wheel must turn
	freely.
		27
				86	85
				33
3. Identify the Right Upright (78) and the Right		3			Wire Tie
	Upright Spacer (80), which are marked with
	stickers. Insert the Upright Wire (77) through the				78
	Right Upright Spacer as shown.	77
	See the inset drawing. Tie the wire tie in the						77
	Right Upright (78) securely around the end of
	the Upright Wire (77). With the help of a second						80
	person, hold the Right Upright near the Base
	(85). Then, pull the other end of the wire tie until
	the Upright Wire is routed completely through
	the Right Upright.					85
			78
		77	Wire
			Tie
		7