Gold's Gym GGTL03607.5 Upright Spacer 80. Be careful not to pinch, Not fully fold the Frame yet

4. Hold a Bolt Spacer (79) inside the lower end of	4
the Right Upright (78). Insert an M10 x 96mm				5
Bolt (5) with an M10 Star Washer (8) into the		78
Right Upright and the Bolt Spacer. Repeat this
step with a second Bolt Spacer (79), M10 x
96mm Bolt (5), and M10 Star Washer (8).					8	77	79
Hold the Right Upright (78) against the Right
Upright Spacer (80). Be careful not to pinch
the Upright Wire (77). Partially tighten the M10						79	82
x 96mm Bolts (5); do not fully tighten the					80
Bolts yet.
Press a Base Cap (82) into the Base (85).					85
5. With the help of a second person, carefully tip	5
the treadmill onto its right side. Partially fold the
Frame (48) so the treadmill is more stable; do
not fully fold the Frame yet.	2 81				48
Attach a Base Pad (81) to the Base (85) in the
location shown with an M4.2 x 25mm Tek Screw							27
(2) and a Base Pad Spacer (64). Then, attach
another Base Pad (81) with only an M4.2 x	85		64
25mm Tek Screw (2).
Attach a Wheel (86) to the Base (85) with an					86
M10 x 50mm Bolt (27) and an M10 Nut (33). Do			2	81		33
not overtighten the Nut; the Wheel must turn
freely.
6. Have a second person hold a Bolt Spacer (79)	6
inside the lower end of the Left Upright (73).
Insert an M10 x 96mm Bolt (5) with an M10 Star						73
Washer (8) into the Left Upright and the Bolt		5	83
Spacer. Repeat this step with a second Bolt
Spacer (79), M10 x 96mm Bolt (5), and M10	79	8
Star Washer (8).
Orient the Left Upright (73) and the Left Upright
Spacer (83) as shown. Hold the Left Upright	82	79
Spacer and the Left Upright against the Base
(85). Partially tighten the M10 x 96mm Bolts (5);		85
do not fully tighten the Bolts yet.
Press a Base Cap (82) into the Base (85).
With the help of a second person, tip the tread-
mill so that the Base (85) is flat on the floor.
	8