3.Slide the middle shelf onto the mounting flanges of the side panels and secure it in place with 12 hex bolts and lock nuts, as shown in Figure 7.
Note: There are two possible mounting positions for the middle shelf, as shown in Figure 6.
Side Panel
Middle Shelf
Lower Mounting
Position
Figure 7. Middle shelf installed onto the side
panels.
4.Slide the top shelf over the top of the side panels, position the handle on one side, as shown in Figure 8, then secure the top shelf and handle in place with 12 hex bolts and lock nuts.
Handle
Top Shelf
Figure 8. Top shelf and handle installed.
T10048 Collet/Tooling Cart for NT40
5.Attach the side shelf supports to the side shelves with 8 hex bolts and lock nuts, as shown in Figure 9. Fully tighten these fasten- ers.
Note: Take special note of the orientation of the shelf and supports to one another.
Side
Shelf
Supports
Figure 9. Side shelf supports installed.
6.Attach the side shelf assemblies to the side of the cart opposite the handle with 8 hex bolts and lock nuts, as shown in Figure 10. Fully tighten these fasteners.
Note: There are two possible mounting posi- tions for the bottom side shelf assembly.
