INSTALLATION
INSTALL CABLES
WARNING: Be sure all electrical power to the cabinet is off before connecting any of the cables.
WARNING: There is a key guide for alignment on the cables. Be sure the cable plug and receptacles are aligned properly using the key guide. Misalignment can cause short circuit- ing.
NOTE: Be sure the AC supply is properly grounded.
The power supply is mounted on the back of the Glider tray. Be sure the power plug going in to the power supply is screwed all the way in. The power supply cable should be connected to a suitable grounded AC power.
Ensure the equipment is installed near the power source (socket outlet) and that the outlet is easily accessible.
The power cable comes out at the back of the power supply on the rear of the Glider tray. Be sure the plug is screwed in tightly.
11
Doc#