Z Microsystems 21 manual Display Panel Controls, Operations

OPERATIONS

DISPLAY PANEL CONTROLS

The controller features push-button controls on the lower front of the display screen to adjust the brightness of the display, to change the image positioning on the screen, and to refine the screen image. To complete the setup of the display, use the following controls to fine tune the image on the screen:

Z : The Z button is used to switch between available channels.

NOTE: Current configuration holds only one channel. Therefore, this button can not be used to switch channel settings. If the Z button is pressed, press once more to enable the active channel (Channel A).

UP: Move up through menu functions; can also be used to adjust the main screen lighting.

DOWN: Move down through menu functions; can also be used to adjust the main screen lighting.

LEFT: Move left to adjust value for functions.

RIGHT: Move right to adjust value for functions.

MENU: Activate On-Screen Menu. Also, use this button to activate the highlighted function.

EXIT: On-Screen Menu. from main menu or return from sub-menus to main menu.

STANDBY: Place the display in Standby or Active mode; turns the backlight on and off.

16

Doc# 27-0017UM Issued 08/03 Rev 1.0