Locate the Reed Switch (62) and the Magnet (67) on

 

 

 

the left side of the Pulley (64). Turn the Pulley until the

 

1/8 in.

 

Magnet is aligned with the Reed Switch. Make sure

 

64

that the gap between the Magnet and the Reed

 

11

Switch is about 1/8 in. (3 mm). If necessary, loosen

 

62

67

the #8 x 1/2" Ground Screw (11), move the Reed

 

Switch slightly, and then retighten the Screw.

 

Top

 

Reattach the Hood (not shown), and run the treadmill

 

 

for a few minutes to check for a correct speed reading.

 

View

 

PROBLEM: The walking belt slows when walked on

 

 

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12.

b. If the walking belt is overtightened, treadmill perfor-

b

 

 

mance may decrease and the walking belt may be-

2–3 in.

 

come damaged. Remove the key and UNPLUG THE

 

 

POWER CORD. Using the hex key, turn both rear

 

 

 

roller bolts counterclockwise, 1/4 of a turn. When the

 

 

 

walking belt is properly tightened, you should be able

 

 

 

to lift each edge of the walking belt 2 to 3 in. (5 to 7

 

 

 

cm) off the walking platform. Be careful to keep the

 

 

 

walking belt centered. Then, plug in the power cord,

 

Rear Roller Bolts

 

insert the key, and run the treadmill for a few minutes.

 

 

Repeat until the walking belt is properly tightened.

 

 

 

c.If the walking belt still slows when walked on, please see the front cover of this manual.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key

 

 

 

 

 

 

 

 

 

a

 

 

and UNPLUG THE POWER CORD. If the walking

 

 

 

belt has shifted to the left, use the hex key to turn

 

 

 

 

the left rear roller bolt clockwise 1/2 of a turn; if the

 

 

 

 

walking belt has shifted to the right, turn the left

 

 

 

 

bolt counterclockwise 1/2 of a turn. Be careful not to

 

 

 

 

overtighten the walking belt. Then, plug in the power

 

 

 

 

cord, insert the key, and run the treadmill for a few

 

 

 

 

minutes. Repeat until the walking belt is centered.

 

 

 

 

 

 

 

 

 

 

 

 

b. If the walking belt slips when walked on, first remove

b

the key and UNPLUG THE POWER CORD. Using

the hex key, turn both rear roller bolts clockwise, 1/4

 

of a turn. When the walking belt is correctly tightened,

 

you should be able to lift each edge of the walking

 

belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be

 

careful to keep the walking belt centered. Then, plug

 

in the power cord, insert the key, and carefully walk

 

on the treadmill for a few minutes. Repeat until the

 

walking belt is properly tightened.

 

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

24

Page 23 Page 25
Page 24
Image 24
Gold's Gym GGTL04607.2, 550 Top, View Problem The walking belt slows when walked on, Key and Unplug the Power CORD. Using
Page 23 Page 25

GGTL04607.2, 550 specifications

Gold's Gym has long been synonymous with fitness and strength training, and the Gold's Gym 550 (GGTL04607.2) continues this legacy by offering a versatile and feature-rich workout experience. This particular model is designed to cater to both novice and seasoned fitness enthusiasts, bringing a variety of workout options right into the home gym.

One of the standout features of the Gold's Gym 550 is its robust frame construction, which ensures stability and safety during even the most intense workouts. The equipment's solid build can support a wide range of exercises, providing users with the confidence to push their limits without fear of the equipment bending or breaking under pressure.

The Gold's Gym 550 comes equipped with a multi-position utility bench, allowing for a plethora of exercises ranging from bench presses to leg curls. This versatility is a significant selling point, as it enables users to target multiple muscle groups and switch between workouts seamlessly. Additionally, the adjustable bench can be set to various angles, providing optimal positioning for different exercises, maximizing effectiveness while minimizing the risk of injury.

One of the highlights of the GGTL04607.2 is its innovative resistance technology. Utilizing a system of resistance bands and pulleys, users can customize their workout intensity without the need for bulky weights. This not only makes it user-friendly but also enhances safety by eliminating the risk of dropping weights.

The design also includes additional features aimed at enhancing user experience. Ergonomic grips on the handles provide comfort during workouts, while built-in storage for accessories ensures that the area remains clutter-free. The foldable design of the Gold's Gym 550 allows for easy storage and transport, making it ideal for those with limited space.

Moreover, the equipment includes a digital training guide to help users get started and stay motivated. This guide features various workout routines tailored to different fitness levels, ensuring that everyone can find a suitable program to adhere to.

In conclusion, the Gold's Gym 550 (GGTL04607.2) is a remarkable piece of fitness equipment that combines durability, versatility, and advanced technology to meet the needs of a diverse clientele. Whether you're looking to build muscle, improve endurance, or maintain overall health, this gym equipment is an excellent addition to any home gym setup.
Top Page Image Contents