2. Slide a Front Endcap (80) onto the Base (81).

2

 

 

 

 

 

Partially tighten an Endcap Screw (79) into the

 

 

 

79

 

Front Endcap and the Base.

 

 

 

81

80

Slide a Wheel Housing (86) onto the Base (81).

 

 

 

 

Attach the Wheel Housing with a 1" Tek Screw

 

 

 

 

 

 

(77), a Base Pad (89), and a 1 1/4" Tek Screw

 

 

 

 

 

 

(49) as shown.

 

86

 

 

89

 

Attach an additional Base Pad (89) to the Base

 

 

 

 

(81) with a 1" Tek Screw (77).

 

 

89

 

77

 

 

 

 

49

 

 

 

 

 

77

 

 

3. With the help of a second person, carefully tip

3

 

 

 

 

 

the treadmill onto its right side as shown.

81

 

 

 

Partially fold the Frame (26) so the treadmill is

 

70

 

 

more stable. Do not fully fold the Frame until

 

 

 

 

 

the treadmill is completely assembled.

 

 

 

 

 

 

Hold the Left Upright (70) against the Base (81).

 

 

 

 

 

 

Then, thread a 2 3/4" Upright Bolt (85) and a 1"

 

85

 

 

 

 

Upright Bolt (84) with two 3/8" Star Washers (83)

 

 

 

 

 

into the Base (81) and the bottom of the Left

 

 

 

 

 

 

Upright; do not fully tighten the Upright Bolts

 

84

83

 

 

 

yet.

 

 

 

 

 

 

 

 

 

26

 

4. Slide a Front Endcap (80) onto the Base (81).

4

 

 

 

 

 

Partially tighten an Endcap Screw (79) into the

79

 

 

 

 

Front Endcap and the Base.

80

 

 

 

 

Slide a Wheel Housing (86) onto the Base (81).

 

 

 

 

 

 

Attach the Wheel Housing with a 1" Tek Screw

 

 

 

 

 

 

(77), a Base Pad (89), and a 1 1/4" Tek Screw

81

 

 

 

 

 

(49) as shown.

77

 

 

86

 

Attach an additional Base Pad (89) to the Base

 

 

 

 

(81) with a 1" Tek Screw (77).

 

 

89

 

 

 

 

 

 

89

 

 

 

 

 

49

 

 

 

 

 

77

 

 

 

7

 

 

 

 

 

Page 7
Image 7
Gold's Gym 685, GGTL58608.0 manual Upright do not fully tighten the Upright Bolts Yet