Auto operation Optional, During Auto Operation | Goldstar LS242CE

Auto operation (Optional)

1	Press the Start/Stop button.
	The unit will respond with

a beep.

Operating Instruction

ENGLISH

2	Open the door of the remote controller. To select Auto
	Operation, press the operation mode selection button.

Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Cooling	Auto	Healthy	Heating
		Dehumidification	(Heat pump model only)

ON

3	The temperature and fan speed are automatically set by the
	electronic controls based on the actual room temperature. If

you want to change the set temperature, press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will be changed automatically.

To raise the temperature

To lower the temperature

During Auto Operation

❏You cannot control the indoor fan speed. It has already been set by the Fuzzy rule.

❏If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating mode to cooling mode, it must be done by manually resetting.

❏During Auto Operation, pressing the CHAOS swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the CHAOS swing button again.

Owner’s Manual 15

Image 15

Goldstar LS242CE owner manual Auto operation Optional, During Auto Operation

Contents

Room Air Conditioner Table of Contents There is risk of electric shock Safety PrecautionsBe sure not to do Be sure to follow the instruction There is risk of fire or electric shock Explosion, or injury Damage to the product Edges Could cause personal injury Personal injuryShock There is risk of electrical shock There is risk of fire or product failureOxygen deficiency could occur There is risk of explosion or fire To avoid vibration or water leakage It may cause a problem for your neighborsThere is risk of fire or electrical shock Bad connection may cause water leakage There is risk of personal injury Avoid personal injuryThis could damage your health Product Be careful and avoid personal injury There is risk of fire or explosionThey may burn or explode Usage ServicePrior To Operation Preparing For Operation Indoor Symbols Used In This ManualFeatures Introduction Electrical Safety Operating Instruction Controls Remote Control Operations Gentle Breeze by the Chaos logic Cooling operation During Auto Operation Auto operation Optional During Auto Changeover Operation Auto changeover operationOptional Fan speed mode is shifted Healthy dehumidification operationDuring Healthy Dehumidification Operation Heating operation Heat pump model only Close the door of the remote controllerTemperature can be set within a range Remote controller still closed. You can Jet cool operation NEO Plasma Air Purifying Operation only NEO Plasma purification operationOptional Button is pressed again 2nd F operation Delay start/Pre-set stop Additional FeaturesSleep mode Setting the time Vertical Airflow Direction Control Adjust the left/right airflow direction by hand 22C71.6F 23C73.4F 24C75.2F Auto clean OptionalForced operation Test operation Helpful information To disable functionTo enable function Auto restart Indoor Unit Maintenance And Service Air conditioner is operating normally when Outdoor Unit Air conditioner does not cool as it should TroubleshootingAir conditioner may be operating abnormally when Air conditioner does not start No A20434H