Heating operation Heat pump model only | Goldstar LS242CE specs

Operating Instruction

Heating operation (Heat pump model only)

1	Press the Start/Stop button.
	The unit will respond with

a beep.

2	Open the door of the remote controller. To select Heating
	Operation, press the Operation Mode Selection button.

Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Cooling	Auto	Healthy	Heating
	Changeover	Dehumidification (Heat pump model only)

3	Close the door of the remote controller.
3	Set the temperature higher than the room temperature.
	The temperature can be set within a range of
	16°C~30°C(60°F~86°F) at intervals of 1°C(2°F).
ON	To raise the temperature
	To raise the temperature
	To lower the temperature
4	Set the fan speed again with the door of the
4	remote controller still closed. You can

select the fan speed in four steps–low, medium, high and CHAOS. Each time the button is pressed, the fan speed mode is shifted.

Gentle Breeze by the CHAOS logic

❏For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

18Room Air Conditioner

Image 18

Goldstar LS242CE owner manual Heating operation Heat pump model only, Close the door of the remote controller

Contents

Room Air Conditioner Table of Contents There is risk of fire or electric shock Safety PrecautionsBe sure not to do Be sure to follow the instruction There is risk of electric shock Explosion, or injury Damage to the product Edges Could cause personal injury Personal injuryShock There is risk of explosion or fire There is risk of fire or product failureOxygen deficiency could occur There is risk of electrical shock Bad connection may cause water leakage It may cause a problem for your neighborsThere is risk of fire or electrical shock To avoid vibration or water leakage Product Avoid personal injuryThis could damage your health There is risk of personal injury Be careful and avoid personal injury There is risk of fire or explosionThey may burn or explode Preparing For Operation ServicePrior To Operation Usage Introduction Symbols Used In This ManualFeatures Indoor Electrical Safety Operating Instruction Remote Control Operations Controls Cooling operation Gentle Breeze by the Chaos logic Auto operation Optional During Auto Operation Auto changeover operationOptional During Auto Changeover Operation Fan speed mode is shifted Healthy dehumidification operationDuring Healthy Dehumidification Operation Remote controller still closed. You can Close the door of the remote controllerTemperature can be set within a range Heating operation Heat pump model only Jet cool operation NEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only 2nd F operation Button is pressed again Setting the time Additional FeaturesSleep mode Delay start/Pre-set stop Adjust the left/right airflow direction by hand Vertical Airflow Direction Control Test operation Auto clean OptionalForced operation 22C71.6F 23C73.4F 24C75.2F Auto restart To disable functionTo enable function Helpful information Maintenance And Service Indoor Unit Outdoor Unit Air conditioner is operating normally when Air conditioner does not start TroubleshootingAir conditioner may be operating abnormally when Air conditioner does not cool as it should No A20434H