Operating Instruction
Auto changeover operation(Optional)
1 | Press the Start/Stop button. |
The unit will respond with |
a beep.
2 | Open the door of the remote controller. To select Auto Changeover |
Operation, press the Operation Mode Selection button. |
Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Cooling | Auto | Healthy | Heating |
| Changeover | Dehumidification | (Heat pump model only) |
Close the door of the remote controller. Set the temperature
3 lower than the room temperature. The temperature can be set within a range of 18°C~30°C(64°F~86°F) at intervals of 1°C(2°F).
To raise the temperature
ON
| To lower the temperature |
4 | Set the fan speed again with the door |
of the remote controller still closed. |
You can select the fan speed in four
During Auto Changeover Operation
The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature varies over ±2°C from the set temperature, air conditioner keeps the room temperature within ±2°C of the set temperature by auto changeover mode.
