GOSSEN METRAWATT GMBH 19
3.
0Sensor error position readback
Error status
word 2
(heating
current
monitor,
equipment)
1Sensor error heating current
2
3
4Heating current not "off" with positioning signal switched off Current display
flashes
5Heating current < 80% of the set point of the heating current with
active positioning signal
6
7
4.
8EEPROM error 2)
9
10 Function error of rotary button
11 Error of measured value calibration
12
13 Invalid combination of markings
14
15
1) These error bits are deleted after reading. With LE and/or tE , the control function is reactivated.
2) EEPROM error reset by setting the standard parameters with PI = 32h.