GOSSEN METRAWATT GMBH 34
4.4.3 Configuration: Sensor unit, continuous output (PI = 32h)Code Sensor unit1)
1) When switching-over, the physical quantity of the temperature parameter is preserved
Continuous output Code Function Note
Output range Output quantity
0Dh
The current setting2) is
stored as a user defined
default setting.
2) Configuration digits and all parameters except for the interface address Addr.
Configuration in accor-
dance with customer speci-
fications (K9) is stored at
this location and is thus
overwritten.
0°C0 ... 20 mA
0 ... 10 V Actual value
(switching controller)
1°F
2°C4 ... 20 mA
2 ... 10 V
3°F
0Eh
The user defined default
setting 2) is uploaded.
If a setting has never been
previously stored with d, the
factory default setting or the
configuration in accordance
with customer specifications
(K9) is uploaded.
All entries are overwritten,
including the results of self-
optimization and calibration.
4°C0 ... 20 mA
0 ... 10 V Regulation ratio
(continuous controller)
5°F
6°C4 ... 20 mA
2 ... 10 V
7°F
8°C0 ... 20 mA
0 ... 10 V Select
output quantity
with Cont (PI = 3Ah)
9°F
0Ah °C4 ... 20 mA
2 ... 10 V 0Fh The factory default setting2)
is uploaded.
0Bh °F
0Fh Activate default configuration + default parameters