GoVideo DV1130Q manual Digital Multi-channel Sound, Accessory Audio/Video A/V Connections to

Connections (Continued)

Optional, Preferred TV Connections

ote

You can ONLY listen to DVD playback using the COAX- IAL (X), OPTICAL (O) and AUDIO OUT (A2) connec- tions. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.)

Connecting to an Amplifier Equipped with 2- Channel Analog Stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (for A1 or A2 connection) supplied.

Connecting to an Amplifier Equipped with 2- Channel Digital Stereo (PCM) or to an Audio/Video Receiver Equipped with Multi-chan- nel Decoder (Dolby Digital™, MPEG 2, or DTS)

1OUT jacks (COAXIAL X or OPTICAL O) to the corresponding in jack on your amplifier. Use an

optional digital (COAXIAL X or OPTICAL O) audio cable.Connect one of the DVD+VCR’s DIGITAL AUDIO

2output. (See “Digital Audio Output” on page 20).You will need to activate the DVD+VCR’s digital

Digital Multi-channel Sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD+VCR (MPEG 2, Dolby Digital and/or DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

otes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–6-channel digital surround sound via the digital con- nection can only be obtained if your receiver is equipped with a digital multi-channel decoder.

–To see the audio format of the current DVD in the on- screen display, press AUDIO.

DVD+VCR Connections Panel

A1 A2 X O

L	R	COAXIAL	OPTICAL
AUDIO INPUT		DIGITAL INPUT

Amplifier (Receiver)

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or LINE 2 jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using the optional audio/video cables.

Accessory Device Jack Panel

AUDIO

OUTPUT

R

L

VIDEO

OUTPUT

DV1130

OR

Rear of DVD+VCR Front of DVD+VCR

14