Viewing from another angle
having scenes 
Use (
) buttons to move to the desired location.
Perss "Enter" button where you want to mark. You can bookmark up to three scenes.
Use (
) buttons to the marked scenes. And press PLAY button on the scene you want.
Press CLEAR button if you want to delete a marked scene.
NOTE
This function does not work in a disc which contains multiple camera angles.
PROGRAM P00 : 00
Programming in a specific order
Music can be played in a specific order. Programming is only possible at stop mode.
1 Press PROGRAM button.
Press the track number using the number buttons.
Press ENTER button.
Pressing play button afterwards plays back according to the program.
A total of 99 songs can be programmed.
This function is activated for only CD/VCD playback.
For a VCD version 2.0, this function works only when the PBC is turned off.
NOTE
Instructions on using the number buttons ex) Inputting track number 25
Press " 2 " and then " 5 " within 2 seconds. 
For discs that contain less than 25 tracks, pressing " 2 " " 5 " within 2 seconds will input track 2 and track 5.
ex) Inputting track numbers 2 and 5
Press " 2 " and then " 5 " after 2 seconds.
Deleting a program
Pressing STOP button during playback of a programmed song will erase that song from the program.
Pressing CLEAR while programming will delete a song from the program in the reverse order which songs were selected.
Pressing STOP button while programming will erase the whole program.
Operation
23 | 24 |
