TV Tuner Settings
TV Signal
Specifies whether the DVD Recorder is connected to an antenna or cable TV source.
1Press SETUP.
2Select TV Tuner > TV Signal
3 Choose from the following:
Antenna - Select if the DVD Recorder is connected to an antenna.
Cable - Select if the DVD Recorder is connected to a cable TV source.
Auto - Select to have the DVD Re- corder automatically detect if you are using an antenna or cable.
Auto Channel Search
Automatically searches for all available TV stations from antenna or cable TV.
1Press SETUP.
2Select TV Tuner > Utilities > Start Scan.
•The DVD Recorder searches for all available stations.This may take several minutes to complete.
•When finished, press SETUP to exit.
Add/Delete Channels
Allows you to manually add or remove channels.
1Press SETUP.
2Select TV Tuner > Utilities > Add/De- lete.
SETUP
TV Signal | Auto | Start Scan | |
System |
| Add/Delete | |
Uilities | |||
| |||
Language |
| Swap | |
|
| ||
Playback |
|
|
Record CH:15
Audio
TV Tuner
Exit
3Add or delete channels:
•Use to select the desired channel.
•Press ENTER to add or delete the channel.
•When finished, select Exit and press
ENTER.
Swap Channels
Allows you to swap the TV channel order stored in the DVD Recorder to match the channel order stored in your TV set.
1Press SETUP.
2Select TV Tuner > Utilities > Swap.
3 Select the channel to be swapped,
and press ENTER.
4 Select the new channel position, and press ENTER.
•The channels will swap positions.
•Repeat as necessary.
•When finished, select Exit and press
ENTER.
• If you are using a cable box or satellite receiver, you do not 
need to adjust these settings.
SETUP
ENTER
����������
���������������
3 - Setup 27
