Recording from an External Source
Recording from a VCR, Camcorder, etc.
Follow these steps to record from a VCR, camcorder, or other external device.
1Connect your external device to the
front panel or rear panel inputs; see pages
2Insert a blank DVD+R or DVD+RW disc into the disc tray.
• Press OPEN/CLOSE to open and
close the disc tray.
3Press INPUT repeatedly to select:
DV - For a device (such as a digital camcorder) connected to the front
DV Input with a DV cable.
4Set the desired Record Quality.
•Press SETUP, then select Record>Quality; see page 25 for details.
5Cue the device and start playback at the beginning of the scene you wish to record.
6Press REC to start recording.
•To pause recording, press PAUSE.
•To resume recording, press PAUSE
again.
7When finished, press STOP to stop recording.
•The disc is updated with the new recording.This may take a few min- utes to complete.
•To watch your recording, see page 32.
Notes on DV Recording
•Connect a
•A single DV cable is used for input and output of audio, video, data, and control signals.
•After recording stops, a DV control bar appears on screen:
•You can use this control bar to Stop, Play, Pause,
• You can also use Easy Guider to record from an external source. Just follow the steps on page 29, but on Step 4, select