Canon iP4700 Paper Does Not Feed Properly, Check 1 Make sure of the following when you load paper

Paper Does Not Feed Properly Page 386 of 437 pages

Advanced Guide > Troubleshooting > Paper Does Not Feed Properly

Paper Does Not Feed Properly

Check 1: Make sure of the following when you load paper.

When loading two or more sheets of paper, flip through the paper before loading.

When loading two or more sheets of paper, align the edges of the sheets before loading.

When loading two or more sheets of paper, make sure that the paper stack does not exceed the

paper load limit.

However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to less than half of the paper load

limit.

Always load the paper in portrait orientation, either in the Rear Tray or the Cassette, regardless of the printing orientation.

When you load the paper on the Rear Tray, load the paper with the print side facing UP and slide the Paper Guides to align with the both sides of the paper.

When loading paper in the Cassette, load the paper with the print side facing DOWN. Align the right edge of the paper stack against the right edge of the Cassette and slide the Paper Guides against the left and bottom edges of the stack.

Loading Paper

Check 2: Check to see if the paper you are printing on is not too thick or

curled.

Loading Paper

Check 3: Make sure of the following when you load envelopes.

When printing on envelopes, refer to Loading Paper, and prepare the envelopes before printing. Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly.

Check 4: Confirm the paper source setting.

*If the paper source setting is not changed since you purchased this printer, the paper source for plain paper is the Cassette.

Setting with the printer driver:

Switching the Paper Source to Match the Purpose

For information on the paper source for plain paper when the Paper Source on the printer driver is set to Automatically Select:

Setting the Paper Source for Plain Paper

Check 5: Remove the foreign object in the Cassette.

Check 6: Make sure that there are not any foreign objects in the Rear

Tray.