Canon iP4700 manual 359 of 437 pages, Positions

Alarm Lamp Flashes Orange Page 359 of 437 pages

Six flashes:	If the Inner Cover is open when starting printing on paper,
The Inner Cover is opened.	close the Inner Cover, then press the RESUME/CANCEL
	button on the printer.
Seven flashes:	Some ink tanks are not installed in the correct position.
Ink tank is not installed in the correct	(The lamps on the ink tanks flash.)
position.	More than one ink tanks of the same color are installed.
	(The lamps on the ink tanks flash.)
	Confirm that the ink tanks are installed in the appropriate
	positions.
	Routine Maintenance
Eight flashes:	The ink absorber is almost full.
Ink absorber is almost full.	Press the printer's RESUME/CANCEL button to continue
	printing. Contact the service center.
Nine flashes:	Check the device connected to the printer. Printing
The printer has not received a response	photos directly is possible only with a PictBridge
from the digital camera./The digital	compliant device.
camera or digital video camcorder	A communication time out occurs if an operation takes
connected is not compatible with this	too long or if it takes too much time to send data. This
printer.	may cancel printing. In such cases, disconnect and
	reconnect the USB cable.
	When printing from a PictBridge compliant device,
	depending on the model or brand of your device, you may
	have to select a PictBridge compliant print mode on the
	device before connecting it to the printer. You may also
	have to turn on your device or select Play mode manually
	after connecting the device to the printer. Perform
	necessary operations before connecting your device
	referring to its instruction manual.
	If the error is still not resolved, check if you can print
	another photograph.
Ten flashes:	The size of paper may not be compatible with automatic
Cannot perform duplex printing.	duplex printing. The sizes of media suitable for auto duplex
	printing are A4, Letter, A5, and 5" x 7". Make sure that the size
	of the paper loaded in the printer is correct. Pressing the
	RESUME/CANCEL button will eject the paper and restart
	printing from the front side of the next paper. The reverse
	side of the ejected sheet will not be printed.
Eleven flashes:	Print Head nozzles are clogged.
Automatic Print Head Alignment failed.	Press the RESUME/CANCEL button to dismiss the error,
	and print the nozzle check pattern to check the status of
	the Print Head.
	Routine Maintenance
	Paper of size other than A4 or Letter is loaded in the Rear
	Tray.
	Press the RESUME/CANCEL button to dismiss the error,
	then load a sheet of supplied paper (Paper For Print
	Head Alignment) or A4/Letter-sized Canon Matte Photo
	Paper MP-101 with the printing side (whiter side) facing
	UP in the Rear Tray.
	For Automatic Print Head Alignment, always load paper
	on the Rear Tray.
	The Paper Output Slot is exposed to strong light.
	Press the RESUME/CANCEL button to dismiss the error,
	and then adjust your operating environment and/or the
	position of the printer so that the Paper Output Slot is not
	exposed directly to strong light.
	After carrying out the above measures, if the problem
	continues after aligning the Print Head again, press the
	RESUME/CANCEL button to dismiss the error, and then
	perform Manual Print Head Alignment.
	Manual Print Head Alignment