8
Programming a CD or CD+G Disc
1. Load the CD or CD+G Disc into the unit’s CD-Drive, located on the top of the unit.
2. Adjust the Function Switch to CD or CD+G to match the disc.
3. Press the Program Button to begin programming the CD or CD+G Disc (the Program
Indicator Light will blink red).
4. Select a CD or CD+G track using the Skip & Search Buttons.
5. Once the desired track is selected, press the Program Button.
6. Repeat steps 4. and 5. until all of the desired tracks are programmed. This unit allows
up to 19 tracks to be programmed.
7. Press the Play Button to begin playing the programmed tracks.
Operations
Adjusting the 5” Black & White Display
1. Turn the Brightness Dial to adjust the brightness of the 5” display. Increasing the
brightness increases how light the screen displays.
2. Turn the Contrast Dial to adjust the contrast of the 5” display. Increasing the contrast
increases the displayed difference between white and black.
3. Turn the Vertical Hold Dial to adjust the vertical hold of the 5” display. Adjust the
vertical hold to remove vertical tracking lines from the display.