Graco 1030 dimensions Clutch Housing

Clutch Housing

Removal

1.Fig. 16. Remove four capscrews (42) and lock- washers (29) which hold clutch housing (88) to

engine. 90 88

2.Remove screw (101) from under mounting plate (D).

3. Remove engine key (90).

4. Pull off clutch housing (88).

Installation			29
1.	Fig. 16. Push on clutch housing (88).		42
2.	Install four capscrews (42) and lockwashers (29)		D
	and secure clutch housing (88) to engine. Torque
	to 200 in-lb (22.6 NSm).	Fig. 16	101
3.	Install capscrew (101) from beneath mounting		8708A

plate (D). Torque to 26 ft-lb (35.2 NSm).

18 309662